technical data sheet rpc3.50 straight jack 03K121-272S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 180 page p.o.box 1260 d84526 tittmoning germany fa x: +49 8684 18499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to i so 2768 mh interface according to iec 6016923 mechanically compatible with rpc2.92 and sma documents assembly instruction 03 a material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m , over chemical nickel outer contact stainless steel passivated dielectric ps solder sleeve brass gold, 0.1 m min.
technical data sheet rpc3.50 straight jack 03K121-272S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 180 page p.o.box 1260 d84526 tittmoning germany fa x: +49 8684 18499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 w frequency dc to 26.5 ghz return loss 3 25 db, dc to 26.5 ghz insertion loss 0.03 x db insulation resistance 3 5 g w center contact resistance 3.0 m w outer contact resistance 2.0 m w test voltage 1000 v rms working voltage 335 v rms rfleakage 3 100 db up to 1 ghz limitations are possible due to the used cable t ype mechanical data mating cycles 3 500 center contact captivation 3 27 n coupling test torque 1.70 nm recommended torque 0.80 nm to 1.10 nm environmental data temperature range 40c to +85c thermal shock milstd202, method 107, condition b corrosion milstd202, method 101, condition b vibration milstd202, method 204, condition d shock milstd202, method 213, condition i moisture resistance milstd202, method 106 2002/95/ec (rohs) compliant tooling n/a suitable cables ut 141 / rtkfs 141 / rtkflex 402 packing standard 1 pce in bag weight 11.4 g/pce draft date approved date rev. engineering change n umber name date herbert babinger 05/05/04 martin moder 02/08/12 c0 0 12-0205 maik knoll 02/08/12 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in t he effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
